Marine Floating Buoy High Buoyancy Mooring Buoy For Ocean Mooring System

How To Use Marine Floating Buoy Correctly

It is important to use marine floating buoys correctly to prevent unnecessary wear and tear on the mooring system and protect your vessels.

• The number of marine floating buoys is limited, first come first served.
• Maneuver the boat from the helm station so that you can see the buoy throughout the connection.
• Approach slowly from downwind or upstream so that the floating yellow pickup line is closest to you. Place the buoy on the same side of the helm station so that you can see it when you approach.
• Pass the bow line of your bow through the loop of the yellow pickup line. Tie both ends of the bow line to the bow. Do not tie the yellow connection line directly to the ship as it will cause excessive pressure on the mooring anchor. Do not forcibly moor the buoy, as this will pose a danger to you and your hull, and will cause unnecessary stress on the mooring system.
• Release enough line so that the buoy is not pulled underwater and the line is level. Bad days may require more rows. Adding an extra rope will provide a more comfortable experience when your ship is anchored and reduce the wear and tear of the buoy system.
• Check the buoys tied to your boat; you are responsible for your boat. Check if it is stored as expected and report the problem to any shelter.
• When you are ready to leave, loosen the bow line of the bow and pull it through the loop of the yellow pickup line. Then stay away from the mooring lines so you don't get scale on any mooring lines.

Advantage of Marine Floating Buoy

1. Tough, impact-resistant polyethylene plastic (HDPE / MDPE / LLDPE)

2. Built-in UV inhibitors can reduce degradation caused by sunlight

3. Handle can simplify installation of pipeline buoy

4. Molded bolt holes for easy float installation

5. The float can have or without foam core

6. Monolithic structure​

Additional Attention Points of Marine Floating Buoy

1. In many coral reefs, marine floating buoys surround the shallowest coral reef area or are located on the ocean side of the coral reef. Approach the marine floating buoy from either side of these shallow waters and always turn to the outside of the buoy ring. Do not drive directly over the shallow reef to reach the buoy.
2. You should keep idling/not waking up near the boat buoy. Do not meander between buoys and watch out for swimmers, snorkelers, and divers foam.
3. If there is no buoy, it can only be anchored in the sand, not in the coral. Always check to make sure your anchor is not dragging and the anchor chain is not in contact with the coral.
4. Encourage smaller ships to moor to each other, thereby allowing larger ships to enter the buoy.
5. When the sailboat is on the buoy, it should not drop the large sail like a stable sail; this puts a lot of pressure on the bolts of the mooring ring.
6. The buoy positions have been separated to provide clearance for most ships when moored under normal conditions. To avoid grounding, be careful when approaching or strapping to the buoy. Containers larger than average must be checked for depth to avoid contact with the bottom.

Specification of Marine Floating Buoy

For further information free to contact us.

Qingdao Jerryborg Marine Machinery Co., Ltd is a leading international marine products manufacturer & distributor with 15+ years of rich experience in production of marine docking & mooring systems. Jerryborg Marine Machinery Co., Ltd, headquartered in Qingdao, China, is committed to marine fendering and floating products production, R&D and sales. The Jerryborg Marine is equipped with production facilities for high-quality rubber products, ship launching airbags and foam fenders, Yokohama type pneumatic rubber fender, navigation buoys, steel/EVA mooring buoy, distributing mooring ropes, steel wire ropes, marine hardware like anchor chains, anchors, etc.

The Jerryborg serves as a strategic partner of Marine Fender & Mooring Industry, providing excellent products as well as professional and technical expertise. While our true role is designer and manufacturer for marine docking & mooring systems with accessories. We value all customers as important parts of our team, supporting them like close partners. we are with them at each step of the project, from technical consulting, engineering customized fendering and mooring solutions to the manufacturing and installation of marine docking & mooring systems. Our rich experience has earned a good reputation as a dependable partner in the waterways markets, harbors, international ports, etc.

Regional Distributors

The Jerryborg headquarters in Qingdao has an experienced team handling projects and orders from North American region, Asian-Pacific region, European region and EMEIA. The regional distributors promote the local contact with customers. Our cooperation with regional distributors is based on mutual trust, loyalty, long and close working partnership. During our annual meeting all our distributors meet with the service teams to keep informed on industry developments and to catch up with our highly internal quality standards as the best counselors for our customers. Direct contact between all our employees and distributors plays a significant role in our company’s development.

Manufacturing Facilities

Providing safe & critical marine fender systems and mooring systems, the Jerryborg has a strong focus on manufacturing all major spare parts in-house, guaranteeing “higher than highest” quality and reliability at their own production machines. Our rubber fender manufacturing machines in Qingdao has an extensively proven track record of manufacturing high quality rubber fender products & mooring products.

All staff and partners who are involved in the production of marine products are well qualified, frequently trained and further educated to keep up with the latest developments in their specific job.rubber rolling mill, fender press test machine, rubber vulcanizer.

Jerryborg's Focus

It is the mission of what our products are meant to do——creating the value of protection and safety. We offer the full range of marine fender products and marine mooring buoy products, from simple rubber products to highly engineering systems, as well as spare parts and fixings. A strong focus lies on internal manufacturing to offer high-level fenders & buoys at reasonable prices.

our fender systems are designed with an eye for the big picture to make sure our products qualified for the task, while paying attention to every little detail. Engineering advantages means that our partners can be confident in expecting the best from us in all areas.