Best-selling Pneumatic Rubber Fender For Ship Docking And Mooring With Tyre And Net

Best-selling Pneumatic Rubber Fender

Best-selling pneumatic rubber fenders are widely used for ship-to-ship transfer, double banking, and ship-to-dock berths. They are preferably used in ports where the tides vary greatly. Jerryborg's best-selling pneumatic rubber fenders can be easily deflated, enabling simple and cost-effective relocation, providing protection in dock and ship-to-ship mooring scenarios. We offer products in various sizes, and they can also be fitted with tires or chain nets to provide additional protection.

Best-selling pneumatic rubber fender is marine equipment used to prevent ships, ships, and other naval vessels from colliding with each other or crashing into docks, wharves, and piers. In other words, best-selling pneumatic rubber fenders can be simply called marine bumpers.

Best-selling Pneumatic Rubber Fender Structure

Best-selling pneumatic rubber fender is composed of three vulcanized layers, each of which provides an important function in the structure and service life of the fender. The three layers are (1) the inner rubber layer, (2)the reinforced cord layer (3) the outer rubber layer.

The outer rubber layer uses special compounds that provide additional tensile strength and tear strength to protect the fender from severe weather conditions and frequent use, while the inner rubber layer is specially designed to seal the internal air and prevent any leakage, just like the inner tube of a tire. The reinforced layer is a composite tire cord with cross shadow lines, which is designed to distribute stress evenly.

Best-selling Pneumatic Rubber Fender Application

1.Tankers, gas carriers, and bulk carriers;

2.Fast ferry and aluminum hull vessels;

3.Quick response and emergency fender;

4.As an anti-collision fender used to realign ships with coastal facilities.

Best-selling Pneumatic Rubber Fender Classification

Best-selling pneumatic rubber fenders are produced with two initial pressure ratings, which are pneumatic 50 (P50, initial internal pressure 50kPa) and pneumatic 80 (P80, initial internal pressure 80kPa).

Best-selling pneumatic rubber fenders are mainly classified into three types as follows:

1. Best-selling Pneumatic Rubber Fender with Chain and Tyre Net

With chain and tire net covering the fender body, the best-selling pneumatic rubber fender can reduce the damage of friction and abrasion caused by direct contact. Therefore it’s widely used in places with complicated and unstable tide variation, such as ship-to-ship(STS) and ship-to-dock(STD) operations. In addition, as for the protective tire, Jerryborg offers four types of tires with different sizes and thicknesses for customers to choose from.

2. Sling Type Best-selling Pneumatic Rubber Fender

Sling type best-selling pneumatic rubber fender will be connected with a guy chain or guy rope with a lifting device on both ends.

3. Hydro Pneumatic Type Best-selling Pneumatic Rubber Fender

Hydropneumatic best-selling pneumatic rubber fender is usually used as a bumper with submarines and other semi-submersible platforms. It can be installed vertically in the water cause it’s filled with air and water inside and equipped with a counterweight.

All these best-selling pneumatic rubber fenders mentioned above are available usually in black, the color is also customized upon your request. Jerryborg offers best-selling pneumatic rubber fenders with various sizes in diameter ranging from 500mm to 4500mm, length ranging from 1000mm to 9000mm.

4. Other Types

Best-selling Pneumatic Rubber Fender Advantage

1. Shape Conformant at Inclined Compression

The best-selling pneumatic rubber fender is made of reinforced cord layers of high elasticity and flexibility, which enable it to make its shape conformant at inclined compression during ship-to-ship operations. Compared with solid fender and foam fender, the best-selling pneumatic rubber fender is easier to distribute the load along the ship's body or berthing structure.

2. Relatively Low Economic Cost

With the advantage of compressive elasticity of air, the surface pressure of best-selling pneumatic rubber fenders is completely uniform, which is equal to the internal air pressure and makes it popular with LNG-ship terminals.

Specifications of Best-selling Pneumatic Rubber Fender

Pneumatic 50 Standard Sizes:

Pneumatic 80 Standard Sizes:

For further information free to contact us.

Qingdao Jerryborg Marine Machinery Co., Ltd is a leading international marine products manufacturer & distributor with 15+ years of rich experience in production of marine docking & mooring systems. Jerryborg Marine Machinery Co., Ltd, headquartered in Qingdao, China, is committed to marine fendering and floating products production, R&D and sales. The Jerryborg Marine is equipped with production facilities for high-quality rubber products, ship launching airbags and foam fenders, Yokohama type pneumatic rubber fender, navigation buoys, steel/EVA mooring buoy, distributing mooring ropes, steel wire ropes, marine hardware like anchor chains, anchors, etc.

The Jerryborg serves as a strategic partner of Marine Fender & Mooring Industry, providing excellent products as well as professional and technical expertise. While our true role is designer and manufacturer for marine docking & mooring systems with accessories. We value all customers as important parts of our team, supporting them like close partners. we are with them at each step of the project, from technical consulting, engineering customized fendering and mooring solutions to the manufacturing and installation of marine docking & mooring systems. Our rich experience has earned a good reputation as a dependable partner in the waterways markets, harbors, international ports, etc.

Regional Distributors

The Jerryborg headquarters in Qingdao has an experienced team handling projects and orders from North American region, Asian-Pacific region, European region and EMEIA. The regional distributors promote the local contact with customers. Our cooperation with regional distributors is based on mutual trust, loyalty, long and close working partnership. During our annual meeting all our distributors meet with the service teams to keep informed on industry developments and to catch up with our highly internal quality standards as the best counselors for our customers. Direct contact between all our employees and distributors plays a significant role in our company’s development.

Manufacturing Facilities

Providing safe & critical marine fender systems and mooring systems, the Jerryborg has a strong focus on manufacturing all major spare parts in-house, guaranteeing “higher than highest” quality and reliability at their own production machines. Our rubber fender manufacturing machines in Qingdao has an extensively proven track record of manufacturing high quality rubber fender products & mooring products.

All staff and partners who are involved in the production of marine products are well qualified, frequently trained and further educated to keep up with the latest developments in their specific job.rubber rolling mill, fender press test machine, rubber vulcanizer.

Jerryborg's Focus

It is the mission of what our products are meant to do——creating the value of protection and safety. We offer the full range of marine fender products and marine mooring buoy products, from simple rubber products to highly engineering systems, as well as spare parts and fixings. A strong focus lies on internal manufacturing to offer high-level fenders & buoys at reasonable prices.

our fender systems are designed with an eye for the big picture to make sure our products qualified for the task, while paying attention to every little detail. Engineering advantages means that our partners can be confident in expecting the best from us in all areas.